ROUTEROS CHANGE SOFTWARE ID SERIAL NUMBER

Here is my > export hide-sensitive may/31/2021 19:29:02 by RouterOS 6.48.3 software id = BS0G-I4NA model = RBwAPR-2nD serial number = C0220B14ED28 The V2 is OK, but has Status:unknown for the gateway and in V3 I got error: ID taken. Is there a working example for configuration on both sides? I was trying to register new gateway on V2 and V3 witgout success. I also added in the firewall of the mikrotik that udp and tcp is allowed on eth1.Д«ut still no luck to get it connected to TTN. I added port forwarding for port 1700 udp and tcp on my ISP router in client mode. Set 0 forward=crc-valid name=OE1KFR_GW servers=TTN-EU-open Ipsec-policy=out,none out-interface-list=WAN вЂњdefconf: drop all from WAN not DSTNATedвЂќ connection-nat-state=!dstnatД¬onnection-state=new in-interface-list=WANДЄdd action=accept chain=input in-interface=ether1 protocol=udpДЄdd action=accept chain=output out-interface=ether1 protocol=udpДЄdd action=accept chain=input in-interface=ether1 protocol=tcpДЄdd action=accept chain=output out-interface=ether1 protocol=tcpДЄdd action=masquerade chain=srcnat comment=вЂњdefconf: masqueradeвЂќ вЂњdefconf: accept established,related, untrackedвЂќ connection-state=ДЄdd action=drop chain=forward comment=вЂњdefconf: drop invalidвЂќ вЂњdefconf: accept to local loopback (for CAPsMAN)вЂќ dst-address=127.0.0.1ДЄdd action=drop chain=input comment=вЂњdefconf: drop all not coming from LANвЂќДЄdd action=accept chain=forward comment=вЂњdefconf: accept in ipsec policyвЂќДЄdd action=accept chain=forward comment=вЂњdefconf: accept out ipsec policyвЂќДЄdd action=fasttrack-connection chain=forward comment=вЂњdefconf: fasttrackвЂќ вЂњdefconf: accept established,related,untrackedвЂќ connection-state=ДЄdd action=drop chain=input comment=вЂњdefconf: drop invalidвЂќ connection-state=ДЄdd action=accept chain=input comment=вЂњdefconf: accept ICMPвЂќ protocol=icmp Supplicant-identity=MikroTik wpa-pre-shared-key=ДЄdd name=dhcp ranges=192.168.88.10-192.168.88.254ДЄdd address-pool=dhcp disabled=no interface=wlan1 name=defconfДЄdd address=us. down-port=1700 name=TTN-USДЄdd address=eu. down-port=1700 name=TTN-EUДЄdd address=.work down-port=1700 name=TTN-EU-openДЄdd comment=defconf interface=wlan1 list=LANДЄdd comment=defconf interface=ether1 list=WANДЄdd address=192.168.88.1/24 comment=defconf interface=wlan1 network=ДЄdd address=10.0.0.140/24 interface=ether1 network=10.0.0.0ДЄdd address=192.168.88.0/24 comment=defconf gateway=192.168.88.1

Set authentication-types=wpa2-psk mode=dynamic-keys Outdoor mode=ap-bridge ssid=MikroTik-B8825D station-roaming=enabled Set band=2ghz-b/g/n channel-width=20/40mhz-XXД¬ountry=austria disabled=no distance=indoors frequency=auto installation= Similar posts did not point me in the correct direction.

Sorry to ask for help or double post, but my knowledge on router configuration is not that good and I have still not managed to get it connected to TTN EU network.

Routeros change software id